jw specifications typical applications compact pc board power relay jw relays vde mm inch 20.0 .787 12.8 .504 28.6 .1.126 features miniature package with universal terminal footprint high dielectric withstanding for transient protection: 10,000 v surge in ? between coil and contact sealed construction class b coil insulation types available tv rated (tv-5) types available (only for 1 form a type) vde, t?v, semko, sev, fimko, tv-5 also approved contact coil #1 this value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. remarks * speci?ations will vary with foreign standards certi?ation ratings. * 1 detection current: 10ma * 2 wave is standard shock voltage of 1.2 50 s according to jec-212-1981 * 3 excluding contact bounce time * 4 half-wave pulse of sine wave: 11ms; detection time: 10 s * 5 half-wave pulse of sine wave: 6ms * 6 detection time: 10 s * 7 refer to 6. conditions for operation, transport and storage mentioned in ambient environment * 8 when using relays in a high ambient temperature, consider the pick-up voltage rise due to the high temperature (a rise of approx. 0.4% v for each 1? 33.8? with 20? 68? as a reference) and use a coil impressed voltage that is within the maximum allowable voltage range. characteristics standard type high capacity type arrangement 1 form a, 1 form c, 2 form a, 2 form c 1 form a, 1 form c initial contact resistance, max. (by voltage drop 6 v dc 1 a) 100 m ? contact material silver alloy rating (resistive load) nominal switching capacity 5 a 250 v ac, 5 a 30 v dc 10 a 250 v ac, 10 a 30 v dc max. switching power 1,250 va, 150 w 2,500 va, 300 w max. switching voltage 250 v ac, 30 v dc max. switching current 5 a 10 a min. switching capacity #1 100 ma, 5 v dc expected life (min. ope.) mechanical (at 180 cpm) 5 10 6 electrical (at 6 cpm) (resistive load) 10 5 nominal operating power 530 mw standard type high capacity type max. operating speed (at rated load) 6 cpm initial insulation resistance min. 1,000 m ? at 500 v dc initial breakdown voltage* 1 between open contacts 1,000 vrms for 1 min. between contacts and coil 5,000 vrms for 1 min. between contact sets 3,000 vrms for 1 min. (2 form a, 2 form c) initial surge voltage between contacts and coil* 2 min. 10,000 v operate time* 3 (at nominal voltage) max. 15 ms release time (without diode)* 3 (at nominal voltage) max. 5 ms temperature rise (at 20?) (at nominal voltage) (with nominal coil voltage and at nominal switching capacity) 1a: max. 39 c 1c, 2a, 2c: max. 55 c (resistance method) 1a: max. 45 c 1c: max. 55 c (resistance method) shock resistance functional* 4 min. 98 m/s 2 {10 g} destructive* 5 min. 980 m/s 2 {100 g} vibration resistance functional* 6 approx. 98 m/s 2 {10 g}, 10 to 55 hz at double amplitude of 1.6 mm destructive approx. 117.6 m/s 2 {12 g}, 10 to 55 hz at double amplitude of 2.0 mm conditions for operation, transport and storage* 7 (not freezing and condensing at low temperature) ambient temp.* 8 ?0 c to +85 c ?0 f to +185 f humidity 5 to 85% r.h. unit weight approx. 13 g .46 oz 1. home appliances tv sets, vcr, microwave ovens 2. of?e machines photocopiers, vending machines 3. industrial equipment nc machines, robots, temperature controllers all rights rese r v ed ?c opyright matsushita elect r ic w o r k s , ltd.
jw ordering information types standard (5a) types high capacity (10 a) types coil data (at 20 c 68 f ) contact arrangement coil voltage, v dc part no. contact arrangement coil voltage, v dc part no. 1 form a 5 jw1asn-dc5v (-f) 2 form a 5 jw2asn-dc5v 6 jw1asn-dc6v (-f) 6 jw2asn-dc6v 9 jw1asn-dc9v (-f) 9 jw2asn-dc9v 12 jw1asn-dc12v (-f) 12 jw2asn-dc12v 18 jw1asn-dc18v (-f) 18 jw2asn-dc18v 24 jw1asn-dc24v (-f) 24 jw2asn-dc24v 48 jw1asn-dc48v (-f) 48 jw2asn-dc48v 1 form c 5 jw1sn-dc5v 2 form c 5 jw2sn-dc5v 6 jw1sn-dc6v 6 jw2sn-dc6v 9 jw1sn-dc9v 9 jw2sn-dc9v 12 jw1sn-dc12v 12 jw2sn-dc12v 18 jw1sn-dc18v 18 jw2sn-dc18v 24 jw1sn-dc24v 24 jw2sn-dc24v 48 jw1sn-dc48v 48 jw2sn-dc48v contact arrangement coil voltage, v dc part no. contact arrangement coil voltage, v dc part no. 1 form a 5 jw1afsn-dc5v (-f) 1 form c 5 jw1fsn-dc5v 6 jw1afsn-dc6v (-f) 6 jw1fsn-dc6v 9 jw1afsn-dc9v (-f) 9 jw1fsn-dc9v 12 jw1afsn-dc12v (-f) 12 jw1fsn-dc12v 18 JW1AFSN-DC18V (-f) 18 jw1fsn-dc18v 24 jw1afsn-dc24v (-f) 24 jw1fsn-dc24v 48 jw1afsn-dc48v (-f) 48 jw1fsn-dc48v nominal voltage, v dc pick-up voltage, v dc (max.) (initial) drop-out voltage, v dc (min.) (initial) nominal operating current, ma ( 10%) coil resistance, w ( 10%) nominal operating power, mw max. allowable voltage 5 3.5 0.5 106 47 530 130% v of nominal voltage (at 60 c 140 f ) 120% v of nominal voltage (at 85 c 185 f ) 6 4.2 0.6 88 68 9 6.3 0.9 58 155 12 8.4 1.2 44 270 18 12.6 1.8 29 611 24 16.8 2.4 22 1,100 48 33.6 4.8 11 4,400 ex. jw contact arrangement *only for 1 form a and 1 form c type ul/csa, vde, semko, fimko, sev approved type is standard. notes: contact capacity protective construction pick-up voltage coil insulation class coil voltage 1: 1 form c 1a: 1 form a 2: 2 form c 2a: 2 form a nil: standard (5 a) f: high capacity (10 a)* s: sealed type n: 70% of nominal voltage nil: class e insulation b: class b insulation dc 5, 6, 9, 12, 18, 24, 48 v environmental support rohs directive conforming type (agsno 2 type) f: 1a (standard/high capacity) nil: 1c (standard/high capacity), 2a (standard), 2c (standard) rohs directive non-conforming type (agcdo type) nil: 1a (standard/high capacity) 1 f s n b dc5v 1. when ordering tv rated (tv-5) types, add suffix-tv (available only for 1 form a type). 2. standard packing: carton: 100 pcs. case: 500 pcs. all rights rese r v ed ? c opyright matsushita elect r ic w o r k s , ltd.
jw dimensions mm inch reference data 1 form a 0.5 .020 0.3 .012 0.3 .012 0.4 .016 12.8 .504 7.6 .299 1.1 .043 2.4 .094 3.5 .138 0.9 .035 28.6 1.126 20 .787 stand-off 20 .787 3.6 .142 pc board pattern (copper-side view) tolerance: 0.1 .004 wiring diagram (bottom view) 20 .787 4-1.3 dia. 4-.051 dia. 2.4 .094 3.5 .138 7.6 .299 relay outline 12.8 .504 com n.o. coil 1 form c 0.5 .020 0.3 .012 0.5 .020 0.3 .012 0.4 .016 20 .787 3.6 .142 3.5 .138 3.5 .138 12.8 .504 1.1 .043 2.4 .094 28.6 1.128 16.5 .650 7.6 .299 0.8 .031 pc board pattern (copper-side view) tolerance: 0.1 .004 wiring diagram (bottom view) 16.5 .650 5-1.3 dia. 5-.051 dia. 2.4 .094 3.5 .138 3.5 .138 7.6 .299 relay outline com coil n.c. n.o. dimension : gener al toler ance max. 1mm .039 inch 0.1 .004 1 to 3mm .039 to .118 inch 0.2 .008 min. 3mm .118 inch 0.3 .012 2 form a 0.5 .020 0.3 .012 0.3 .012 0.4 .016 20 .787 3.6 .142 12.8 .504 1.1 .043 1.3 .051 28.6 1.128 20 .787 5 .197 7.5 .299 0.8 .031 pc board pattern (copper-side view) tolerance: 0.1 .004 wiring diagram (bottom view) 20 .787 6-1.3 dia. 6-.051 dia. 1.3 .051 5 .197 7.5 .295 relay outline com coil n.o. 2 form c 0.5 .020 0.3 .012 0.5 .020 0.3 .012 0.4 .016 20 .787 3.6 .142 5 .197 5 .197 12.8 .504 1.1 .043 1.3 .051 28.6 1.128 15 .591 7.5 .295 0.8 .031 pc board pattern (copper-side view) tolerance: 0.1 .004 wiring diagram (bottom view) 15 .591 6-1.3 dia. 6-.051 dia. 1.3 .051 5 .197 5 .197 7.5 .295 relay outline com coil n.o. n.c. dimension : gener al toler ance max. 1mm .039 inch 0.1 .004 1 to 3mm .039 to .118 inch 0.2 .008 min. 3mm .118 inch 0.3 .012 1-(1). maximum operating power 1 form a standard (5 a) type 1-(2). maximum operating power 1 form a high capacity (10 a) type 1-(3). maximum operating power 1 form c standard (5 a) type 10 100 10 100 1,000 1 contact voltage, v ac resistive load dc resistive load contact current, a 10 100 10 100 1,000 1 contact voltage, v ac resistive load dc resistive load contact current, a 10 10 100 1,000 1 0 contact voltage, v ac resistive load (cos = 1.0) contact current, a all rights rese r v ed ? c opyright matsushita elect r ic w o r k s , ltd.
jw 1-(4). maximum operating power 1 form c high capacity (10 a) type 1-(5). maximum operating power 2 form a standard (5 a) type 1-(6). maximum operating power 2 form c standard (5 a) type 10 10 100 1,000 1 0 contact voltage, v ac resistive load (cos = 1.0) contact current, a 10 10 100 1,000 1 0 contact voltage, v ac resistive load (cos = 1.0) contact current, a 10 10 100 1,000 1 0 contact voltage, v contact current, a ac resistive load (cos = 1.0) 2-(1). life curve 1 form a standard (5 a) type 2-(2). life curve 1 form a high capacity (10 a) type 3-(1). operate/release time sample: jw1asn-dc12v, 10 pcs. ambient temperature: 20 c 68 f 100 10 51015 contact current, a life, 10 4 250 v ac resistive load 30 v dc resistive load (cos =1.0) 100 10 51015 contact current, a life, 10 4 250 v ac resistive load 30 v dc resistive load (cos =1.0) 80 90 100 110 120 5 0 10 min. max. min. x - x - max. coil applied voltage, %v operate/release time, ms operate time release time 3-(2). operate/release time sample: jw1afsn-dc12v, 10 pcs. ambient temperature: 20 c 68 f 3-(3). operate/release time sample: jw1sn-dc12v, 6 pcs. ambient temperature: 20 c 68 f 3-(4). operate/release time sample: jw2asn-dc24v, 6 pcs. ambient temperature: 20 c 68 f 80 90 100 110 120 5 0 10 min. max. min. x - x - max. coil applied voltage, %v operate/release time, ms operate time release time x max. min. 13 12 11 10 9 6 4 80 90 100 110 8 7 3 22 1 5 80 90 110 130 120120 max. min. max. min. x - x - coil applied voltage, %v operate/release time, ms 14 13 12 10 8 6 4 2 80 90 100 110 120 14 13 12 10 8 6 4 2 80 90 100 110 120 min. x - x - coil applied voltage, %v operate/release time, ms operate time release time max. max. min. 3-(5). operate/release time sample: jw2sn-dc12v, 6 pcs. ambient temperature: 20 c 68 f 4-(1). coil temperature rise (contact carrying current: 5a) sample jw1afsn-dc12v, 6 pcs. point measured: inside the coil 4-(2). coil temperature rise (contact carrying current: 10 a) sample: jw1afsn-dc12v, 6 pcs. point measured: inside the coil 9 8 7 6 5 4 3 2 1 0 80 90 100 110 120 130 max. coil applied voltage, %v operate/release time, ms operate time release time min. max. min. max. x - x - 100 140 120 160 10 20 30 40 50 60 70 0 coil applied voltage, %v temperature rise, c 85 c 60 c 25 c 100 140 120 160 10 20 30 40 50 60 70 0 coil applied voltage, %v temperature rise, c 85 c 60 c 25 c all rights rese r v ed ? c opyright matsushita elect r ic w o r k s , ltd.
jw for cautions for use, see relay technical information accessories din terminal socket features 1. space saving design 2. wiring can be done with ease (din terminal) for 2 poles n.c. contact raw n.o. contact raw com contact raw coil terminal raw for 1 poles n.c. contact raw n.o. contact raw com contact raw coil terminal raw types specifications product name number of poles part no. applicable relay type standard packing 1 form a 1 form c 2 form a 2 form c inner carton outer case jw1 din terminal socket (with hold-down clip) 1 jw1-sfd 10 pcs. 100 pcs. jw2 din terminal socket (with hold-down clip) 2 jw2-sfd jw1 pc board socket 1 jw1-ps jw2 pc board socket 2 jw2-ps jw1 plug-in socket 1 jw1-ss jw2 plug-in socket 2 jw2-ss type item pc board socket/plug-in socket din terminal socket 1 pole 2 poles 1 pole 2 poles breakdown voltage 1,500 vrms for 1 minute 1,500 vrms for 1 minute 1,000 vrms for 1 minute insulation resistance min. 100 m min. 100 m mm inch dimensions 1. din terminal socket 7 54 2 8 63 1 7.5 0.2 .295 .008 28.5 0.6 1.122 .024 3 0.3 .118 .012 67 1 2.638 .039 15 0.3 .591 .012 5 0.3 .197 .012 5 0.3 .197 .012 4.3 0.3 .169 .012 3.5 .138 6.5 .256 3.5 dia. .138 dia. 6.5 dia. .256 dia. 35.4 0.5 1.394 .020 21 0.6 .827 .024 20.6 0.6 .811 .024 2. pc board socket 32 0.6 1.260 .024 13 0.6 .512 .024 0.8 0.1 .031 .004 21.5 0.6 .846 .024 4 0.6 .157 .024 6.7 0.3 .264 .012 pre-soldering 0.3 0.1 .012 .004 0.35 0.1 .014 .004 pc board pattern (bottom view) 1 form a 1 form c 2 form a 2 form c tolerance: 0.1 .004 (4.4) (.173) 16.5 .650 3.5 .138 3.5 .138 7.6 .299 5-1.3 dia. 5-.051 dia. (4) (.157) 5 .197 5 .197 15 .591 7.5 .295 8-1.3 dia. 8-.051 dia. 3. plug-in socket 37 0.6 1.457 .024 36.4 0.6 1.433 .024 13 0.6 .512 .024 25.4 0.6 1.000 .024 8.6 0.3 .339 .012 8 0.6 .315 .024 2 0.3 .079 .012 2 0.3 .079 .012 1.9 0.3 .075 .012 1 0.3 .039 .012 details of terminal portion panel cut-out (thickness: 1.0 to 2.0 .039 to .079 ) tolerance: 0.1 .004 34.9 1.374 11.9 .469 all rights rese r v ed ?c opyright matsushita elect r ic w o r k s , ltd.
|
